Konuyu Oyla:
  • Derecelendirme: 0/5 - 0 oy
  • 1
  • 2
  • 3
  • 4
  • 5

Stres testi programları
#8



İnsanlar bazen son değiştirdikleri ayar sorunu çözünce onun kesin çözüm olduğunu düşünebiliyorlar. Ben de durum böyle mi diye test etmek için o iki ayarı tekrar eski haline getirince crash olayı tekrar başladı.




 




 



Alıntı:
20 hours ago, T800 said:




İlginç olmuş çünkü RAM’i hızlandırmışsın Gear Down dsiabled ederek, öteki ayar ne onu hiç bilmiyorum.




 




Gear Down Mode asıl hızlandırma işini yapan ayar değil okuduklarımdan anladığım kadarıyla:






 



Alıntı:
Quote




 




The AGESA 1.0.0.6 update allows motherboard vendors to offer toggles in their setup utilities for a couple of new options: Bank Group Swap (BGS) and Gear Down Mode (GDM). The first option has an effect on how physical addresses are assigned to applications, while the latter option may improve memory compatibility by reducing the effective data rate on the command and address buses. 




 




...




 




The effects of the Gear Down Mode option appear to be a little more complicated. While it is enabled, setting the "command rate" option for memory timings is pointless; it will always effectively be "2T" (although the company notes it's not quite the same thing—1T versus 2T command rates may still be worth exploring on their own). Disabling GDM will allow memory overclockers to manually set the DRAM command rate to "1T" and realize the full benefits of doing so. Tweakers have known for a long time that a 1T command rate can have huge effects on memory performance, and the Ryzen platform is no exception. However, if your memory can't run a 1T command rate at its spec'd clock rate, or if you're overclocking and can't hit a high clock with a 1T command rate setting, you could just be making your system less stable by disabling GDM.




 




 




 




Kaynak: http://techreport.com/news/32248/amd-det...sa-1-0-0-6




 



Alıntı:
Quote




GDM is enabled by default for memory speeds greater than DDR4-2667 per the DDR4 spec. GDM allows the RAM to use a clock that’s one half the true DRAM frequency for the purposes of latching (storing a value) on the memory’s command or address buses. This conservative latching can potentially allow for higher clockspeeds, broader compatibility, and better stability—good for the average user[..]For overclockers, Geardown Mode will be noteworthy because it also tells the memory subsystem to "disregard" the command rate set in the BIOS. As 1T command rates can be beneficial (though tough to maintain) for performance.




 




Kaynak: http://www.tomshardware.com/news/amd-ryz...35012.html




 



Alıntı:
Quote




Geardown Mode: Allows the DRAM device to run off its internally-generated ½ rate clock for latching on the command or address buses. ON is the default for speeds greater than DDR4-2667, however the benefit of ON vs. OFF will vary from memory kit to memory kit. Enabling Geardown Mode will override your current command rate.




 




Kaynak: https://community.amd.com/community/gami...-talk-dram


Bul
Cevapla


Bu Konudaki Yorumlar
Stres testi programları - Yazar: rammstein - 26-09-2017, 01:26
Stres testi programları - Yazar: Whooosh - 26-09-2017, 03:02
Stres testi programları - Yazar: T800 - 26-09-2017, 07:59
Stres testi programları - Yazar: rammstein - 26-09-2017, 08:27
Stres testi programları - Yazar: Najaz - 26-09-2017, 10:42
Stres testi programları - Yazar: rammstein - 12-10-2017, 21:32
Stres testi programları - Yazar: T800 - 12-10-2017, 22:38
Stres testi programları - Yazar: rammstein - 13-10-2017, 19:14

Hızlı Menü:


Konuyu Okuyanlar: 1 Ziyaretçi