13-06-2019, 21:27
@ZvAnAhocam sen yazınca şimdi kontrol ettim de, benimkisi aynı değil. Netmaster Infinity 401 Modem ve TP Link Archer C20 router var. Modem, bridge modunda çalışıyor.
Alıntı:
Quote
<p style="color:#000000;">
Most Cable ISPs (Internet Service Provider) register the unique MAC Address from the wired connection on your MAIN COMPUTER - the last computer used to be connected with the Cable Modem and had Internet connection
.
<p style="color:#000000;">
If you add a router to the network, your ISP may not recognize the MAC address of the router and not allow it to connect.
<p style="color:#000000;">
However, TP-LINK router can "clone" or replicate the registered MAC address of the MAIN COMPUTER. Then your ISP can release the Internet connection to the router and all the computers.
<p style="color:#000000;">
<p style="color:#000000;">
<b>Note</b>:
<ol style="color:#000000;" type="1">[*]
Please ensure you are doing the MAC Clone with the wired connection of your MAIN COMPUTER
which used to be connected with your Cable Modem and had Internet connection.
[*]
Only the PC(s) in your LAN can use the <b>MAC Address Clone</b> feature.
[*]
If you change <b>WAN MAC Address</b> when the WAN connection type is PPPoE, it will not take effect until the connection is re-established.
</ol>
Alıntı:
On 12.06.2019 at 21:50, ZvAnA said:
Konu hort olacak biraz ama iki gün önce ofisimdeki netmaster modem bozuldu. Yaklaşık 5-6 senedir netmaster modem bridge modda ve TP-Link WDR3600 router ile birlikte sıkıntısız kullanıyordum.
Neyse bugün, sağolsun bir tanıdığımın boşta duran cbw-383z4 model netmaster modemini temin ettim. Yeni modemin mac adresini uydunete bildirdim. Yarım saat sonra hat geldi.
Sonra modemin Friewall ve kablosuz özelliklerini de devre dışı bırakıp birdge mode'a aldım. Modem sorunsuz kendi bridge mode'a geçti. Ancak kendi router'ım üzerinden (TP-Link WDR-3600) interneti almaya çalıştığımda epey uğraştım. Kablonette bridge mode'la ilgili genellikle bir sürü forumda router'a klonlanacak mac adresinin yeni modemin mac adresi olması gerektiği söyleniyor. Ben de bu şekilde hareket ettiğim için iki saat internete bağlanamadım. Router bir türlü modemden dynamic ip alamadı. Sonra tplinkin kılavuzunda klonlanacak mac adresinin, yeni modemin mac adresi değil, modemle internete ilk çıktığım bilgisayarın mac adresinin olması gerektiğini fark ettim. Sonra hatırladım ki ben de zaten 5 sene önce de bu şekilde yapmıştım. Bu şekilde tekrar ofisimdeki tüm cihazlar routerımın kontrolüne girdi ve sorunsuz şekilde internet tekrar bağlanmış oldu.
Uydunet abonesi olup da bridge mod deneyip başarısız olan falan olursa aklında olsun. Netmaster modem ve TPlink routerla bende hep bu şekilde çalışıyor bridge mod. Sıkıntısız da kullanıyorum.
Alıntı:
On 05.06.2020 at 20:30, wazzap said:
ben bridge mode'a aldım ama PC'ye giden ethernet modemden bağlı, Router sadece kablosuz yayın yapıyor. İyi mi ediyorum yoksa kötü mü bilmiyorum açıkçası./emoticons/smile@2x.png 2x" title=":)" width="15" />