Cursed Hardware
RPi 4 (HDMI 2.0) to HP LP3065 (DVI-D) 2560x1600? - Baskı Önizleme

+- Cursed Hardware (https://forum.cursedhardware.com)
+-- Forum: Donanım / Yazılım (https://forum.cursedhardware.com/forumdisplay.php?fid=4)
+--- Forum: Donanım (https://forum.cursedhardware.com/forumdisplay.php?fid=13)
+--- Konu Başlığı: RPi 4 (HDMI 2.0) to HP LP3065 (DVI-D) 2560x1600? (/showthread.php?tid=847)



RPi 4 (HDMI 2.0) to HP LP3065 (DVI-D) 2560x1600? - UNOPARATOR - 01-23-2020



Raspberry Pi 4 (HDMI 2.0) çıkışından, emektar HP LP3065 monitörüme (DVI-D Dual-link) nasıl native çözünürlükte (2560x1600) görüntü aktarabilirim???




Bu emektar monitörün detaylarına (pek bir şey yok) şuradan bakabilirsiniz.




Denemediğim/almadığım kablo/adaptör kalmadı, en fazla 1280x800 olarak çalıştırabildim; onun da nasıl gözüktüğünü tahmin edersiniz. [Resim: default_icon_wink.gif]/emoticons/wink@2x.png 2x" title=";)" width="15" />



Yardımlarınıza ihtiyacım var.





RPi 4 (HDMI 2.0) to HP LP3065 (DVI-D) 2560x1600? - Najaz - 01-23-2020


20" Philips 1680 x 1050 çözünürlükte bir monitöre bir ucu HDMI bir ucu DVI kablo ile RP2'den native çözünürlükte görüntü aktarabilmiştim. Öyle özel bir kablo da değildi hatırladığım kadarıyla.




RPi 4 (HDMI 2.0) to HP LP3065 (DVI-D) 2560x1600? - Whooosh - 01-23-2020



Config.txt dosyasını şu şekilde düzenleyerek bir deneyin



Kod:
hdmi_group=2 hdmi_mode=77 hdmi_cvt=2560 1600 60 3 0 0 1 max_framebuffer_width=2560 max_framebuffer_height=1600 hdmi_pixel_freq_limit=400000000



 





RPi 4 (HDMI 2.0) to HP LP3065 (DVI-D) 2560x1600? - UNOPARATOR - 01-23-2020


Alıntı:
2 hours ago, Najaz said:




20" Philips 1680 x 1050 çözünürlükte bir monitöre bir ucu HDMI bir ucu DVI kablo ile RP2'den native çözünürlükte görüntü aktarabilmiştim. Öyle özel bir kablo da değildi hatırladığım kadarıyla.




1920x1200'e kadar DVI-D Single-link olduğu için sıkıntı yaratmıyor normalde. Fakat benim bu monitör sadece 2560x1600 (native) veya 1280x800 çözünürlük destekliyor.



Alıntı:
2 hours ago, Whooosh said:




Config.txt dosyasını şu şekilde düzenleyerek bir deneyin



Kod:
hdmi_group=2 hdmi_mode=77 hdmi_cvt=2560 1600 60 3 0 0 1 max_framebuffer_width=2560 max_framebuffer_height=1600 hdmi_pixel_freq_limit=400000000



 




hdmi_cvt satırı hariç geri kalanını fazladan başka birkaç satırla birlikte denemiştim.Yazdığın şekilde denediğimde "/opt/vc/bin/tvservice -s" çıktısı olarak "state 0x6 [DVI CUSTOM RGB full unknown AR], 1280x800 @ 60.00Hz, progressive" diyor. Dolayısıyla bir fayda etmedi.





RPi 4 (HDMI 2.0) to HP LP3065 (DVI-D) 2560x1600? - sgi - 01-23-2020


Yanlış anlamadıysam bu monitörde 2560*1600'e çıkabilmek için dvi girişlerinden 2sini de bağlamak gerekiyor, kutudan da herhalde o yüzden 2 dvi kablo çıkıyor. Bir ucu hdmi, diğer ucu 2x dvi gibi bir kablo da var mı bilmiyorum. Yoksa da belki bu iş için dönüştürücü kutu falan gibi birşey vardır.




RPi 4 (HDMI 2.0) to HP LP3065 (DVI-D) 2560x1600? - Onur - 01-24-2020



Selamlar;




 




Sorunuzun cevabı şurada saklı:




https://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/LP3065-only-offers-1280x800-resolution-in-my-PC/td-p/6695617




 



Alıntı:
Quote




 




Have you tried to use two cables at the monitor end ? It has Three DVI-D connectors with two DVI-D cables included because with single link you can only have 1280x800 max as mentioned in:




https://www.anandtech.com/show/2194/2




 



Alıntı:
Quote




Video Inputs(3) DVI-D Dual-Link
(Supports Single-Link DVI for 1280x800 with HDCP)




<a contenteditable="false" data-ipshover="" data-ipshover-target="<___base_url___>/profile/130-sgi/?do=hovercard" data-mentionid="130" href="<___base_url___>/profile/130-sgi/">@sgi</a> ' ın dediğini teyit etmiş oldum. [Resim: default_icon_smile1.gif]/emoticons/smile@2x.png 2x" title=":)" width="15" />




RPi 4 (HDMI 2.0) to HP LP3065 (DVI-D) 2560x1600? - UNOPARATOR - 01-24-2020



Ne yazık ki yanlış anlamışsınız. DVI-D Dual-link demek 2 kablo bağlamak değil, 24+1 pinli kablo kullanmak demek oluyor. (bkz. wikipedia )




Önceki mesajımda belirttiğim üzere: 



Alıntı:
Quote




Fakat benim bu monitör sadece 2560x1600 (native) veya 1280x800 çözünürlük destekliyor.




Yani Dual-link'te 2560x1600, Single-link'te 1280x800.




10+ yıldır, PC ile türlü ekran kartı/anakart çıkışları ile tek bir DVI-D Dual-link kablo ile native çözünürlük 2560x1600 alabilmekteyim.




<a contenteditable="false" data-ipshover="" data-ipshover-target="<___base_url___>/profile/59-onur/?do=hovercard" data-mentionid="59" href="<___base_url___>/profile/59-onur/">@Onur</a>  Paylaşmış olduğun link'in 2. sayfasında benzer problemi Display Port --> DVI-D Dual-link için Active Adapter kullanarak çözmüşler. Fakat bunun HDMI 2.0 --> DVI-D Dual-link versiyonunu bulamadım. O link'tekinin ucuna bir de Display Port --> HDMI 2.0 dönüştürü takarsam olur mu bilemiyorum (Raspberry'den daha büyük olacağı kesin)...





RPi 4 (HDMI 2.0) to HP LP3065 (DVI-D) 2560x1600? - Onur - 01-24-2020



<a contenteditable="false" data-ipshover="" data-ipshover-target="<___base_url___>/profile/65-unoparator/?do=hovercard" data-mentionid="65" href="<___base_url___>/profile/65-unoparator/">@UNOPARATOR</a>




Valla HDMI' dan DVI Dual Link' e dönüştüren (1080p çözünürlük üstü, yani dediğin gibi Dual link DVI) bir aparat ben de bakındım bulamadım. Birisi şöyle birşey yazmış:

 




http://forum.notebookreview.com/threads/hdmi-to-dvi-d-2560x1600-adapter.717288/page-2



Alıntı:
Quote




You won't be able to get 2560x1600 over a passive HDMI to single link DVI cable/adapter, it's just not possible. Single link DVI only supports up to a maximum resolution of 1920x1200, to get 2560x1600 requires a dual link DVI. The problem then arises that using a HDMI to Dual link DVI passive solution only transmits the HDMI singal down one link of the DVI cable and not both - end result being still stuck at lower resolution than required.

The only real way that I know of for getting 2560x1600 would require an active solution and unfortunately, no one seem to make an active HDMI to Dual Link DVI adapter - plenty of DisplayPort to Dual link DVI's but not going from HDMI.


It seems that to get 2560x1600 over HDMI requires both source and input to have a minimum HDMI spec of 1.4 and the cable needs to be a high speed HDMI cable too, otherwise there is not enough bandwidth to carry the signal.


Again, trying to find equipment that is indeed capable of outputting and receiving a full HDMI 1.4 signal is a tricky thing to do.




 




Heralde en son dediğin gibi çift dönüştürücülü bir çözüm olacak gibi görünüyor.





RPi 4 (HDMI 2.0) to HP LP3065 (DVI-D) 2560x1600? - Onur - 01-24-2020



Hocam şöyle bişey buldum, 2560x1600 desteklediği söyleniyor:




https://www.amazon.com/technology-Bi-Directional-2560x1600-Nintendo-Computer/dp/B0756YGW87




Bir de şöyle bir açıklama (piyasada dual link diye satılan çoğu kablonun pasif bağlantı olduğu ile alakalı)




https://superuser.com/questions/332099/does-a-hdmi-to-dvi-dual-link-adapter-exist-i-dont-care-about-the-price





RPi 4 (HDMI 2.0) to HP LP3065 (DVI-D) 2560x1600? - UNOPARATOR - 01-24-2020



Raspberry Pi 4 model B'deki HDMI'lar 2.0 olduğu için 4K olduğunu bildiren (amazon link'indeki gibi) yeni HDMI - DVI-D DL kablo da aldım, 4K HDMI - HDMI kablo da aldım ucuna HDMI - DVI-D DL dönüştürücü dongle ile yeni fayda etmedi.




Satılan çoğu kablo pasif denilen konuya da denk gelmiştim, ama bir umut denedim olmadı tabi... Ayrıca aliexpress'te de vs de arattım ama sadece DP - DVI-D çözümler var. [Resim: default_icon_sad.gif]/emoticons/sad@2x.png 2x" title=":(" width="15" />